We see quite a few final drive hydraulic motors that have been severely damaged by abrasive contamination on the hydraulic side. In this Shop Talk Blog post, we discuss what abrasive contamination is, where it comes from, what it does to your final drive, and how it can be minimized.
Here are a few more blog posts you might be interested in reading ...
Skid steer loaders are awesome machines -- they鈥檙e maneuverable, their compact, and they can perform all kinds of tasks. However, they鈥檝e been around long enough to be the victim of myths and misinformation. In this Shop Talk Blog post, we are going to dispel five myths about the skid steer loader.
.jpg)
A bad bearing can wipe out a final drive fast 鈥� but how can you tell if a bearing is going bad? Here are four things to look for that can indicate you have issues with your bearings. If your final drive is exhibiting any of these symptoms, you need to have it checked out right away.
Here are some additional posts that you might want to take a look at ...
Hot hydraulic fluid can be one of the causes of an overheating final drive motor. If your hydraulic fluid is running at a higher than normal temperature then it can cause problems for your entire hydraulic system. In this Shop Talk Blog post, we are going to talk about what can cause hydraulic fluid to overheat.
Here are a few more blog posts you might find of interest ...
We know that some people prefer to work on their own final drive hydraulic motors. In this Shop Talk Blog post, we provide 5 tips to help you when it comes time to reassemble your final drive, beginning with a clean work area!
Here are some other Shop Talk Blog posts you might find helpful, too ...
Your final drive is just one of many components that make up the hydraulic system on your machine. All those components share the same hydraulic fluid. If contamination enters at one point in the system, you run the risk of it causing damage to other parts of the system. That鈥檚 why it is so critical to you do your best to prevent hydraulic contamination. In an ideal world, you would only open up the hydraulic system in a clean environment -- but we realize that isn鈥檛 always realistic. Here are some practical hints and tips to help you prevent hydraulic contamination.
Here are some other blog posts on similar subjects ...
You might have noticed in some of our videos about reman final drives that we tend to use Loctite on some of the bolts and fasteners we install. In this Shop Talk Blog post, we are going to discuss what Loctite threadlocker is, what it does, why we use it, and what kind we typically use.
Here are some other Shop Talk Blog posts that you might find helpful ...
has teamed up with to put their self-driving track loader to work on a commercial construction site in Billings, Montana. This is a big step forward for Built Robotics, which first introduced their autonomous track loader last year.
Here are a few other posts you might be interested in ...
If you鈥檝e ever taken a final drive apart, you know that it has a ton of seals and o-rings. Each one serves an important purpose, so for this Shop Talk Blog post we decided to discuss the types of seals used in final drives. We鈥檒l also discuss why they are important, what can happen when they fail, and hints and tips for installing them.
Here are a few other Shop Talk Blog posts you might be interested in ...
Hydraulic fluid, sometimes referred to as hydraulic oil, is the medium used to transmit power in hydraulic systems. It is a complex liquid that has to serve many different purposes and posses many different characteristics. In this Shop Talk Blog post, we are going to discuss the nature of hydraulic fluid, including what it鈥檚 made from, what properties it needs to have, and what fundamental properties makes it work so well.
Here are some other Shop Talk Blog posts you might enjoy ...
