ÌìÃÀÊÓƵ

Crushing accidents don’t just happen when someone gets run over by equipment -- they can also occur when you’re working on your equipment and don’t take hazardous energy into account.

Here are a few other Shop Talk Blog posts you might enjoy:

• Maintaining a Bobcat Final Drive
• Case Drain Disasters
• Fuel Costs and Compact Equipment

In this Shop Talk Blog post, we’ll talk about hazardous energy, its dangers, and why it’s so important to be careful.

What is Hazardous Energy?

In a nutshell, hazardous energy is any energy source in equipment or machines that can pose a hazard to workers. This includes 

• Electrical
• Chemical
• Thermal
• Hydraulic
• Mechanical

Why is Hazardous Energy Important?

The main danger related to hazardous energy involves maintenance or service, where a release of energy or an unexpected startup can quickly lead to serious injury or death.  So what sort of injuries are we talking about? For compact equipment, these injuries include 

• Crushing
• Lacerations
• Fractures
• Amputation
• Death

What Goes Wrong With Hazardous Energy

So what causes these injuries? Experts agree that the five most common causes of injuries related to hazardous energy are …

1. Not shutting the equipment down first
2. Not disconnecting it from a power source
3. Accidentally restarting the equipment
4. Failure to clear out the work area before restarting the equipment
5. Failure to dissipate the residual energy (e.g., bleed the system)

Taking the time to bleed hydraulic lines, lowering booms or arms, or utilizing safety features -- such as lift arms -- can go a long way in preventing these types of risks.

In addition, to minimize the chances that 1, 2, and 3 occur, OSHA recommends having a LOTO procedure in compliance with . And when electrical systems and circuits are involved, also applies. 

Hazardous Energy, Maintenance, and Injuries

So, is hazardous energy really a danger -- but what does it have to do with crushing energies and maintenance? Let’s look at some examples through the years.

In, an individual was working on the lift boom cylinder of a skid steer when it fell from its pin. A second individual had started to bleed the hydraulic lines but did not completely lower the bucket to the ground. The first employee fell to the ground, suffering fractures to his back, ankles, and legs.

While working on the hydraulic system of a skid steer loader with the bucket raised in , an individual was trapped when the bucket fell. He was later found dead beneath the bucket. Another involved the repair of a faulty hydraulic valve on a Bobcat 763 when the loader frame fell suddenly, fatally crushing an individual between the front frame and loader frame.

On , an individual was maintaining a skid steer loader with the operator’s cab tilted forward. He accidentally actuated the loader lift arms while in the seating area, which pushed the cage back to its normal operating position. As a result, his chest was pinned between the seat and the underside of the case, leading to him being crushed and killed.

In, an individual performing maintenance on a skid steer loader was crushed between the chassis and lift arm. The result was asphyxiation. Then, an individual maintaining an excavator was fatally crushed by the bucket in . 

An incident on involved a technician working on a Bobcat 853H to repair a hydraulic leak. At one point, the hydraulic hose failed -- while he was standing underneath the bucket. As a result, the bucket dropped on him, trapping him and leading to his asphyxiation due to the crushing of his upper body and bones. 

In another Bobcat incident (this time a Bobcat S70), an individual cleaning in was pinned by the neck between the boom bucket life bar and the horizontal bar above the caged seating area. There were no witnesses, and he was later found dead. Also in , two individuals were killed when a skid steer bucket fell on them while they were installing a new control valve. In , an individual was connecting weights to the clamp of an excavator boom. The boom struck him, leading to fatal internal injuries.

Conclusion

At ÌìÃÀÊÓƵ, we know our customers are careful, but we just want to re-emphasize the importance of safety during the maintenance and repair of your equipment. For example, several of these accidents could have been avoided using the lift arm supports on skids steers/CTLs. Please stay safe!